S50C Carbon Steel Plate

in stock

 

1050 carbon steel plate is a medium tensile low hardenability carbon steel.

 

Looking for S50C Carbon Steel Plate?

S50C Carbon Steel also known as
  • AISI 1050 Steel 
  • G10500 Carbon Steel
  • DIN CK50 Steel 
  • 760 Carbon Steel 

*Different country have different code for this carbon steel. 

 

Properties of S50C Carbon Steel Plate

1050 Carbon Steel / C50 Carbon Steel / 760 Carbon Steel is characterised by good strength and impact properties, with good machinability and reasonable weldability in the as supplied condition.  It has a low through hardening capability with sections up to around 60mm only generally recommended as suitable for through hardening and tempering.  It can however be successfully flame or induction hardened in the as supplied condition resulting in surface hardnesses of up to Rc 54 – Rc 60 depending upon quenching medium employed, type of set up, section size etc.

Core strengths will remain as supplied.  It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements. 

1050 Carbon Steel / C50 Carbon Steel / 760 Carbon Steel is used extensively by all industry sectors for applications requiring more strength and wear resistance than the low carbon mild steels can provide and the higher strength of the low alloy high tensile steels is not necessary, plus those applications requiring flame or induction hardening.

 

Typical applications for S50C Carbon Steel Plate

1050 Carbon Steel / C50 Carbon Steel / 760 Carbon Steel Plate is mostly used for Axles Various, Bolts, Connecting Rods, Hydraulic Clamps and Rams, Pins Various, Rolls Various, Studs, Shafts, Spindles etc.

 

Technical Data of 760 Carbon Steel Plate

DINAISIJIS
CK501050S50C
Chemical Composition   
CMnPS
0.48-0.550.60 to 0.90≤ 0.030≤ 0.035
Physical Properties  
PropertiesMetricImperial
Density7.85 g/cm ³0.284 lb/in³
Thermal Properties  
PropertiesMetricImperial
Thermal conductivity (typical steel)49.8 W/mK346 BTU in/hr.ft².°F
Mechanical Properties  
PropertiesMetricImperial
Tensile strength690 MPa100000 psi
Yield strength580 MPa84100 psi
Shear modulus (typical for steel)80 GPa11600 ksi
Bulk modulus (typical for steel)140 GPa20300 ksi
Elastic modulus190-210 GPa27557-30458 ksi
Poisson’s ratio0.27-0.300.27-0.30
Elongation at break (in 50 mm)10%10%
Reduction of area30%30%
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only)13-
Hardness, Brinell197197
Hardness, Knoop (converted from Brinell hardness)219219
Hardness, Rockwell B (converted from Brinell hardness)9292
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only)1313
Hardness, Vickers (converted from Brinell hardness)207207