Looking for Hardox 400?
HARDOX 400 is an abrasion resistant plate with a hardness of 400 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 400 offers very good weldability.
Typical Applications for Hardox 400
Hardox 400 is mostly used for Crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, dump trucks, loaders, industrial trucks, lorries, bulldozers, excavators, slurry pipe systems, screw conveyors, presses etc.
Hardness : 370-430 HBW
Yield strength: 1000MPa
Tensile strength : 1250MPa
Testing temperature:- 40 °C
Impact energy Charpy-V, longitudinal : 45(J)
Dimensions available for wear-resistant plate
HARDOX 400 is supplied in plate thicknesses of 3 -130 mm. More detailed information on dimensions is provided in our brochure 042-UK General Product Information WELDOX, HARDOX and ARMOX.
*) Plate thickness below 4 mm only after special agreement.
Heat Treatment and Fabrication of Hardox 400
HARDOX 400 has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition can not be retained after exposure to service or preheating temperatures in excess of 250oC (480o F).
HARDOX 400 is not intended for further heat treatment. For information concerning welding and fabrication, see our brochures on www.hardox.com or consult our Technical Customer Service.
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.